Posted on Leave a comment

Gaps in machine embroidery – 5 easy ways to solve


Choosing some more complicated embroidery design you may always be worried as the embroidery can be a rewarding and enjoyable hobby, but it can also be challenging, especially when trying to embroider difficult designs as sometimes the final product may not turn out as expected due to gaps in machine embroidery design. But you shouldn’t worry, here we will describe the tips on how to solve gaps in machine embroidery in 5 easy ways.

In this post, we would like to describe :

What are the gaps in Machine Embroidery designs?

The gap is an area where the fabric shows through the design, resulting in an incomplete or unfinished look. The gap in machine embroidery design can be resolved in a few ways.

Why the gaps in machine embroidery may occur?

Gapping in machine embroidery is a common issue that can occur when there are visible spaces or holes between stitches. It can be frustrating to see gaps in the final product, especially after investing time, effort, and materials into creating the embroidery.

Gapping can occur due to several reasons, including incorrect thread tension, using the wrong needle or thread, incorrect hooping, using the wrong stabilizer, incorrect machine settings, and fabric type.

To avoid gapping in machine embroidery, it’s essential to pay attention to the factors mentioned below.

5 Ways to solve gaps in machine embroidery designs

#1 Tension settings of your machine

 First, check the tension settings of your machine and make sure they are properly adjusted. If the tension is too high or too low, it can cause gaps in the design.

#2 Stabilizer

Another possible cause could be the stabilizer not being secure enough, so try using a heavier stabilizer or adding more layers.

3#Changing the needle size

If the gap is still present, try changing the needle to a smaller or larger size depending on the thickness of the fabric. If the needle is too small, it may not create enough tension, resulting in gaps. On the other hand, if the needle is too large, it may damage the fabric and create holes or gaps. Therefore, select the appropriate needle size to ensure a smooth and flawless embroidery design.

4#Thread thickness

Sometimes thread thickness can cause gaps in embroidery designs if it is not appropriate for the type of fabric or the design being stitched. If the thread is too thick for the fabric, it may not pass through the fabric easily and create gaps in the design. On the other hand, if the thread is too thin, it may not create enough coverage, resulting in gaps in the design.

5# Hooping
Lastly, make sure that the fabric is being hooped correctly, with the right amount of tension, and is not shifting during the stitching process. By checking these potential causes and making adjustments as needed, you can resolve the gap in your machine embroidery design and achieve a smooth and flawless finish.

Here you can find some great machine embroidery designs for your new embroideries

Follow us:

Leave a Reply